D-Link DSS-200G-28MPP 28-Port 10/100/1000 PoE Gigabit Ethernet Surveillance Switch

The D-Link DSS-200G-28MPP is a 28-port managed Gigabit PoE switch built for IP camera and surveillance networks. It suits installers and businesses that need to power and manage many cameras from one rack-mounted unit. It has a 518W PoE budget, and ports 1 to 8 support 802.3bt at up to 90W per port.

Key features

• The 518W PoE budget gives you room to power a large group of cameras and other PoE devices from one switch.
• Ports 1 to 8 support 802.3bt at up to 90W each, for higher-draw devices.
• All PoE ports have 6 kV surge protection.
• A DIP switch sets per-port options: QoS, Isolate, PD Alive and PoE Extend.
• PoE Extend runs a camera up to 250 meters without an intermediary device, and PD Alive automatically reboots devices that stop responding.
• The switch auto-detects ONVIF devices, configures a surveillance VLAN automatically, and has a surveillance-focused management interface.

Specifications

Brand: D-Link

Model: DSS-200G-28MPP

Product Series: DSS-200G

Product Type: Ethernet Switch

Network Switch Type: Managed

Layer Supported: 3

Network Technology: 10/100/1000Base-T

Total Number of Network Ports: 28

PoE (RJ-45) Port: Yes

PoE Budget: 518W

Number of Total Expansion Slots: 2

Media Type Supported: Optical Fiber

Mount Type: Rack Mount

Power Source: AC Power

Input Voltage: 120V AC

Frequency: 50Hz

Power Consumption: 579.3000W

Height: 1.70″

Width: 17.30″

Depth: 13.00″

Weight: 10.38lb

NDAA Compliant: Yes

TAA Compliant: No

Country of Origin: CN

Packaged Quantity: 1

Installation notes

Mount the switch in a rack with enough clearance for cabling and airflow. Add up the power draw of all connected devices before commissioning to confirm it fits within the PoE budget. Put any high-power 802.3bt devices on ports 1 to 8, and set the per-port DIP switch options before you deploy the cameras.