Hanwha QNE-C9013RL 4K AI Dual Light Flateye Camera, 3mm Fixed Lens, White

The Hanwha QNE-C9013RL is a 4K AI Dual Light Flateye network camera in white, built for outdoor ceiling-mount installs where low-light image quality matters. It pairs infrared with a visible warm white light in a low-profile flat-eye housing, and it suits installers and businesses covering hallways, data centers and similar spaces. The 8MP sensor, 120dB WDR and IK10, IP66 housing make it a capable all-weather choice.

Key features

• Records up to 8MP (3840x2160) at up to 30 fps in H.265 or H.264.
• A fixed 3.0mm lens gives a wide field of view, with a hallway view mode for narrow spaces.
• Day and Night operation, 120dB WDR and AI-based WiseNRⅡ noise reduction help in difficult lighting.
• AI object classification, attributes and DetectionShot support smarter searching and alerts.
• WiseStreamⅢ, built on the AI engine, is included for stream efficiency.
• Supports ONVIF Profile S/G/T/M and SUNAPI (HTTP API), with PoE and LDC.

Specifications

Model: QNE-C9013RL

Brand: Hanwha

Product Series: Q

Product Type: Flateye Camera

Color: White

Effective Camera Resolution: 8MP

Maximum Video Resolution: 3840 x 2160

Aspect Ratio: 16:9

Maximum Frame Rate: 30fps

Image Sensor Type: CMOS

Lens Type: Fixed Focus

Focal Length: 3mm

Lens Mount Type: M12

Maximum Aperture: f/1.6

Field of View (Horizontal): 108.0°

Field of View (Vertical): 59.00°

Minimum Illumination: 0.0034lux

Shutter Speed: 1/5 second to 1/12,000 second

Wide Dynamic Range: Yes

Night Vision Type: Dual Illumination (IR + Visible)

Night Vision Distance: 98.43'

Video Format: H.264

Storage Type: Memory Card

Connectivity: Wired, Network (RJ-45)

Remote Management: Yes

Cloud Capabilities: Cloud Enabled

Mount Type: Ceiling Mount

Indoor/Outdoor: Outdoor

Ingress Protection Rating: IP66

Impact Protection Rating: IK10

Operating Temperature: -40°F to 140°F

Operating Humidity: 0-95% RH

Environmental Certification: FCC

Height: 3.92″

Diameter: 5.51″

Weight: 1.74lb

Installation notes

Mount the camera to a solid ceiling surface and keep it clear of walls or fixtures that could reflect the IR and visible light back into the lens. Power it over PoE through a single network cable, and confirm the switch port can supply enough power before commissioning.