Ultra-Slim 4K HDBaseT Extender B-540-EXT-70-SLIM with Bi-Directional IR and RS-232

Behind a wall-mounted display there is often very little room. This ultra-slim HDBaseT extender is just 0.61 in thick and moves 4K video, audio and control signals over a single link.

Key Features

• 4K@60Hz 4:2:0 video: The extender provides reliable Ultra HD transmission at a 10 Gbps data rate.
• Ultra-slim form factor: The thin chassis fits spaces where a typical extender would not.
• Power over cable: Power travels along the link, so you can reduce the number of local supplies.
• Bi-directional IR and RS-232: Control signals pass in both directions to reach remote equipment.
• Advanced audio support: Dolby Atmos and DTS-X soundtracks are supported.

Specifications

• Model: B-540-EXT-70-SLIM
• Technology: HDBaseT
• Video: 4K@60Hz 4:2:0
• Data rate: 10 Gbps
• Control pass-through: Bi-directional IR and RS-232
• Audio: Dolby Atmos and DTS-X
• Power consumption: 8.88W
• Dimensions: 4.28 x 0.61 x 2.53 in
• Operating temperature: 32-104°F
• Storage temperature: -4 to 140°F
• Operating humidity: 10-90% non-condensing
• Limited warranty: 2 years

Typical Uses

TV walls, projectors and distributed AV systems where source equipment sits in a rack or closet and the display is far away. A display location often has only a shallow cavity or a tight gap behind a mount, and this is where the thin 0.61 in case helps. Sending control signals along the same link also means that remote equipment hidden in a closet can still respond to commands from the display end, without extra wiring for IR or serial control.

Before You Order

HDBaseT links need compatible equipment at both ends. Confirm your signal format fits 4K@60Hz 4:2:0, and check how your system will handle power over cable.