Coax to PoE Retrofit Adapter UACC-RETROFIT-POE-2WIRE, PoE+ over 2-Wire, BNC, 25W

Replacing old analog cabling can be the most expensive part of a camera upgrade. This retrofit adapter lets you keep it, delivering PoE+ over existing coax or 2-wire runs so that IP devices can work on legacy cable.

Key Features

• PoE+ over legacy wiring: A PoE++ input is converted so that PoE+ can travel across 2-wire or coax lines.
• 25W output and 85 Mbps: Power and data capacity are enough for many edge devices that work within those limits.
• Long cable runs: Runs can reach up to 1,476 ft, with power reduced at the longer distances.
• BNC female connector: Coaxial lines connect directly without changing the existing termination style.
• HomePlug AV networking: Data travels over the line with HomePlug AV alongside a 10/100 MbE interface.
• Polycarbonate enclosure: The lightweight 2.8 oz housing and mounting are made from durable polycarbonate.

Specifications

• Model: UACC-RETROFIT-POE-2WIRE
• Input: PoE++ (50V DC)
• Output: PoE+, up to 25W
• Bandwidth: Up to 85 Mbps
• Maximum run: 1,476 ft (450 m), with reduced power
• Line connector: BNC female
• Networking interfaces: 10/100 MbE, HomePlug AV
• Enclosure: Polycarbonate
• Size: 4.1 x 1.6 x 1 in
• Weight: 2.8 oz
• Operating temperature: 14 to 104°F
• Compliance: CE, FCC, IC

Typical Uses

Upgrading analog CCTV sites to IP cameras, reusing coax in older buildings and connecting devices at the end of a 2-wire run where pulling new Ethernet is impractical.

Before You Order

Check the power and bandwidth needs of your end device against the 25W and 85 Mbps figures, and remember that power drops on long runs. The input must be PoE++. Operating range is 14 to 104°F.