{"title":"GRI","description":"\u003cp\u003eShop GRI door contacts \u0026amp; industrial switches at Kaybee Security.\u003c\/p\u003e","products":[{"product_id":"gri-4612-mini-curtain-door-switch-set-with-up-to-2-inch-gap-reversible-probe-assembly-and-3-foot-armored-cable","title":"GRI 4612 Mini Curtain Door Switch Set with Up to 2-Inch Gap, Reversible Probe Assembly, and 3-Foot Armored Cable","description":"\u003cp\u003eThe Adams Rite 4612-2 is a power transfer device that channels electrical wiring from the door frame into the door itself. It suits installers adding locks, exit devices and similar hardware to doors hung on butt-type hinges. It gives a secure, unobtrusive wiring path and works with aluminum, hollow steel and wood doors and frames.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarries wiring from the frame into the door in a secure, unobtrusive way.\u003c\/li\u003e\n\u003cli\u003eWorks with any door hung on butt-type hinges, including continuous hinges or pivots offset 3\/4″ or less.\u003c\/li\u003e\n\u003cli\u003eCan be applied to aluminum, hollow steel or wood doors and frames.\u003c\/li\u003e\n\u003cli\u003eThe spring steel helix conduit has an internal diameter of about 5\/16″, with room for multiple low-voltage wires.\u003c\/li\u003e\n\u003cli\u003eListed as compatible with the 4300 Electrified Deadlatch and the 7100\/7101 electric strikes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 4612-2\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e 4612 Power Transfer Device (180° Swing)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor:\u003c\/strong\u003e Adams Rite by ASSA ABLOY\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Power Transfer Device\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 30V AC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental certification:\u003c\/strong\u003e UL\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmentally friendly:\u003c\/strong\u003e Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible deadlatch:\u003c\/strong\u003e 4300 Electrified Deadlatch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible electric strikes:\u003c\/strong\u003e 7100\/7101\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConduit inner diameter:\u003c\/strong\u003e approx. 5\/16″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage type:\u003c\/strong\u003e Box\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 1 lb. (0.45 kg)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e CN\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eCheck the hinge type and the door and frame material before you start. Plan the cable run so every conductor fits comfortably inside the conduit without being forced. Keep the wiring free of pinch points as the door swings, and test the connected lock or device through its full range of travel before you finish.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112072925,"sku":"KB-4612","price":83.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/89.jpg?v=1787760114"},{"product_id":"gri-4700-axl-industrial-track-mount-magnetic-switch-set-for-2-5-to-4-inch-tracks-with-up-to-3-inch-gap-and-3-foot-armored-cable","title":"GRI 4700-AXL Industrial Track-Mount Magnetic Switch Set for 2.5- to 4-Inch Tracks with Up to 3-Inch Gap and 3-Foot Armored Cable","description":"\u003cp\u003eThe GRI 4700-AXL is an industrial track-mount magnetic switch set built for overhead and sliding doors on 2.5″ to 4″ tracks. It moves the contacts up onto the track, out of the way of fork lifts and other equipment that tend to damage standard floor switches and cause false alarms. The reversible probe assembly, hinged clamping design and 3 ft. armored cable make it a practical fit for commercial and industrial door installations.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe probe assembly is reversible, so the switch can be installed on the left or right side of the door.\u003c\/li\u003e\n\u003cli\u003eThe cable exit is reversible, which helps with routing in tight spots.\u003c\/li\u003e\n\u003cli\u003eA 3 ft. armored cable comes standard for added protection on the run.\u003c\/li\u003e\n\u003cli\u003eThe multi-position adjustable magnet bracket lets you dial in alignment with up to a 3″ gap.\u003c\/li\u003e\n\u003cli\u003eA hinge design clamps tighter to the track, and the set fits channels from 1.75″ up to 4″.\u003c\/li\u003e\n\u003cli\u003eSelf-drilling screws are included for easy installation, and the contact can be wired as closed loop or SPDT.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 4700-AXL\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct series:\u003c\/strong\u003e 4700-A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Commercial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Freestanding\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTrack size:\u003c\/strong\u003e 2.5″ to 4″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 3.0″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Silver\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eArmored:\u003c\/strong\u003e Yes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact form:\u003c\/strong\u003e Form A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 160V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput current:\u003c\/strong\u003e 400mA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDecide on left or right installation and the cable exit direction before you fasten anything, then clamp the hinged bracket snugly to the track. Set the magnet bracket position so the gap stays within the rated range, and test the alarm loop with the door fully open and fully closed before commissioning.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112105693,"sku":"KB-4700-AXL","price":159.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/88.jpg?v=1787760116"},{"product_id":"gri-700-t-w-capped-miniature-surface-mount-magnetic-switch-set-with-3-4-inch-standard-gap-white","title":"GRI 700-T-W Capped Miniature Surface-Mount Magnetic Switch Set with 3\/4-Inch Standard Gap, White","description":"\u003cp\u003eThe GRI 700-T-W is a capped miniature surface-mount magnetic contact from George Risk Industries, finished in white. It monitors a sliding window as a normally open Form A contact, and its small size and clean look suit residential jobs and spots where space is tight. It mounts with attached 3M double-sided tape, so there is no drilling into window frames.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIts small size makes it a fit for homes and areas with limited space.\u003c\/li\u003e\n\u003cli\u003ePre-applied 3M double-sided tape means no drilling into window frames.\u003c\/li\u003e\n\u003cli\u003ePlated contacts resist sticking or freezing.\u003c\/li\u003e\n\u003cli\u003eIt comes with 12″ #22AWG leads, and longer leads are available on request.\u003c\/li\u003e\n\u003cli\u003eThe 700 series is offered with terminal connection, end leads and center leads.\u003c\/li\u003e\n\u003cli\u003eSwitches and magnets are available separately, and the switch comes in white or brown.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 700-T-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 700\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Surface mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e 3\/4″ standard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact form:\u003c\/strong\u003e Form A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTermination style:\u003c\/strong\u003e 2 lead\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead length:\u003c\/strong\u003e 12″ #22AWG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 160V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput current:\u003c\/strong\u003e 400mA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.40″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 12.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Sliding window\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eClean and dry the window frame and sash before pressing the tape-backed switch and magnet into place, and keep the magnet within the 3\/4″ gap of the switch. Test the loop with the window opened and closed before you run the leads to the panel and finish the cabling.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112138461,"sku":"KB-700-T-W","price":56.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/86.jpg?v=1787760117"},{"product_id":"gri-50rf-12wg-w-1-4-inch-recessed-flanged-magnetic-switch-set-with-3-4-inch-wide-gap-and-12-inch-leads-white","title":"GRI 50RF-12WG-W 1\/4-Inch Recessed Flanged Magnetic Switch Set with 3\/4-Inch Wide Gap and 12-Inch Leads, White","description":"\u003cp\u003eThe GRI 50RF-12WG-W is a ¼″ recessed flanged magnetic contact set in white, with a ¾″ wide gap and a closed loop, normally open contact. It detects a door or window opening in a wired alarm circuit. Its small diameter suits residential jobs where the alarm hardware should stay out of sight.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe ¼″ diameter recessed design suits installs where a small switch set is needed.\u003c\/li\u003e\n\u003cli\u003eIt is UL and ULC approved.\u003c\/li\u003e\n\u003cli\u003eIt comes with standard 12″ leads. Longer leads or zip cord are available on request.\u003c\/li\u003e\n\u003cli\u003eBuilt-in E.O.L. resistors and diodes are available on request, and supervisory loops are available.\u003c\/li\u003e\n\u003cli\u003eThe series also comes in brown or gray, and in open loop or SPDT versions.\u003c\/li\u003e\n\u003cli\u003eSwitches and magnets can be bought separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 50RF-12WG-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct series:\u003c\/strong\u003e 50RF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Recessed Flanged Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoop:\u003c\/strong\u003e Closed loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum switching voltage:\u003c\/strong\u003e 200VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum switching current:\u003c\/strong\u003e 0.50A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum contact rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLeads:\u003c\/strong\u003e 12″, 22AWG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill a clean, correctly sized hole and seat the flanged switch fully so it sits flush. Mount the magnet directly opposite it and within the gap. Check the loop on the panel with the door or window closed and then open before you close up the work.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112171229,"sku":"KB-50RF-12WG-W","price":53.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/85.jpg?v=1787760118"},{"product_id":"gri-4834-t-b-gen-3-8-inch-recessed-stubby-magnetic-switch-set-brown","title":"GRI 4834-T-B-GEN 3\/8-Inch Recessed Stubby Magnetic Switch Set, Brown","description":"\u003cp\u003eThe GRI 4834-T-B-GEN is a 3\/8-inch recessed stubby magnetic switch set in brown, made by George Risk Industries. It's a magnetic contact for monitoring a door or window from inside the frame, so the hardware stays out of sight. It suits installers and homeowners who want a concealed contact on a security system, and it is made in the US.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 4834-T-B-GEN\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill the mounting holes cleanly and to the correct depth so the switch and magnet sit flush in the frame and door or window. Keep the switch and magnet aligned across the gap, then test the circuit with the door or window open and closed before finishing the wiring.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112203997,"sku":"KB-4834-T-B-GEN","price":47.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/84.jpg?v=1787760120"},{"product_id":"gri-4704-a-special-purpose-surface-mount-pull-apart-switch-set-with-3-foot-armored-cable","title":"GRI 4704-A Special-Purpose Surface-Mount Pull-Apart Switch Set with 3-Foot Armored Cable","description":"\u003cp\u003eThe GRI 4704-A is a special-purpose surface-mount pull-apart switch set from GRI, supplied with a 3-foot armored cable. It works as a pull-apart magnetic contact, suited to installers and businesses who need a switch with a protected cable run.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 4704-A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Pull-Apart Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Surface mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable:\u003c\/strong\u003e 3-foot armored\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch and its magnet section on the surface where they will sit close together, and keep the armored cable run neat and secured along its path. Test the contact after mounting by separating the two parts and confirming the panel registers the change.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112236765,"sku":"KB-4704-A","price":81.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/83.jpg?v=1787760121"},{"product_id":"gri-400-industrial-surface-mount-magnetic-switch-set-with-1-1-2-inch-standard-gap-and-concealed-screw-terminals-white","title":"GRI 400 Industrial Surface-Mount Magnetic Switch Set with 1-1\/2-Inch Standard Gap and Concealed Screw Terminals, White","description":"\u003cp\u003eThe GRI 400 is an industrial surface-mount magnetic switch set. It monitors whether a door or window is open or closed and reports that to an alarm system. It has a 1-1\/2-inch standard gap and concealed screw terminals, and it comes in white.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 400\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Industrial Surface-Mount Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e 1-1\/2 inch standard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTerminals:\u003c\/strong\u003e Concealed screw\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eSurface-mount the switch on the frame and the magnet on the moving door or window. Keep the two aligned and close enough to stay within the rated gap. After wiring the terminals, open and close the door a few times and confirm the panel sees each change before you finish.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112269533,"sku":"KB-400","price":58.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/82.jpg?v=1787760122"},{"product_id":"gri-55f-12-w-miniature-surface-mount-magnetic-switch-set-with-1-2-inch-standard-gap-and-12-inch-leads-white","title":"GRI 55F-12-W Miniature Surface-Mount Magnetic Switch Set with 1\/2-Inch Standard Gap and 12-Inch Leads, White","description":"\u003cp\u003eThe GRI 55F-12-W-BA is a miniature surface-mount magnetic contact switch set for wired alarm systems, used to detect when a door or window opens. It suits residential installs, and it combines a low-profile white case with self-adhesive tape mounting and a breakaway flange for screw mounting when needed. It has a 0.50″ standard gap and 12″ side-exit leads from the center of the case.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGRI describes the 55F Series as the most chosen switch set configuration for residential installations.\u003c\/li\u003e\n\u003cli\u003eThe low profile and self-adhesive 3M tape make mounting quick and simple.\u003c\/li\u003e\n\u003cli\u003eA breakaway flange is available where screw mounting is the better choice.\u003c\/li\u003e\n\u003cli\u003eThe leads exit from the middle of the case.\u003c\/li\u003e\n\u003cli\u003eIt is a closed-loop, normally open contact in white.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 55F-12-W-BA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Surface mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 0.50″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoop:\u003c\/strong\u003e Closed loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch rating:\u003c\/strong\u003e 10W, 200VDC, 0.50A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLeads:\u003c\/strong\u003e 12″, 22AWG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTermination style:\u003c\/strong\u003e Center Lead\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eClean and dry the mounting surface before applying the adhesive tape, and use the breakaway flange with screws where the tape may not hold. Keep the magnet and switch aligned and within the standard gap, and test the loop at the panel after mounting.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112335069,"sku":"KB-55F-12-W","price":48.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/80.jpg?v=1787760125"},{"product_id":"gri-50rs-12wg-w-50rs-series-miniature-1-4-inch-recessed-wide-gap-switch-set-white","title":"GRI 50RS-12WG-W 50RS Series Miniature 1\/4-Inch Recessed Wide-Gap Switch Set, White","description":"\u003cp\u003eThe GRI 50RS-12WG-W is a miniature recessed magnetic contact switch set that detects whether a door or window is open or closed. It is a 1\/4″ diameter wide-gap unit, only 0.562″ long, so it suits thin-framed doors and windows and jobs where a regular-size switch is too long. Installers and homeowners who want a hidden, wired contact in white will find it a fit.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe switch is hermetically sealed.\u003c\/li\u003e\n\u003cli\u003ePlated contacts resist sticking or freezing.\u003c\/li\u003e\n\u003cli\u003eIt comes with standard 12″ leads, and longer leads, zip cord or jacketed cable are available on request.\u003c\/li\u003e\n\u003cli\u003eIt is UL and ULC approved.\u003c\/li\u003e\n\u003cli\u003eThe 50RS line is also offered in open loop, closed loop and SPDT versions.\u003c\/li\u003e\n\u003cli\u003eThis switch set comes in white, and brown and gray are also offered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 50RS-12WG-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 50RS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Form:\u003c\/strong\u003e Form A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRating:\u003c\/strong\u003e 10W, 200VDC, 0.50A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Gap:\u003c\/strong\u003e 0.50″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.30″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e End of Line (EOL) Resistor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eSwitches and magnets are sold separately, so confirm you have a matching magnet before you drill. Recess both parts square to each other across the gap, and test the loop with the door or window open and closed before you close up the frame.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112433373,"sku":"KB-50RS-12WG-W","price":54.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/79.jpg?v=1787760128"},{"product_id":"6644-t-magnetic-contact-resistor-pack-with-two-1k-resistors-and-4-pin-terminal-block-white","title":"GRI 6644-T Magnetic Contact Resistor Pack with Two 1K Resistors and 4-Pin Terminal Block, White","description":"\u003cp\u003eThe GRI 6644-T is a magnetic contact resistor pack from George Risk Industries (GRI), model 6644T, supplied in a white case. It holds two 1K resistors with a 4-pin terminal block, so it adds end-of-line resistance to a magnetic contact circuit. It suits installers who need a ready-made resistor pack for contact wiring, and it comes in packs of 10.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContains two 1K, 1\/8 W resistors.\u003c\/li\u003e\n\u003cli\u003eIncludes a 4-pin terminal block for wiring connections.\u003c\/li\u003e\n\u003cli\u003eComes in a white case.\u003c\/li\u003e\n\u003cli\u003eShips as a pack of 10, which is also the minimum order quantity.\u003c\/li\u003e\n\u003cli\u003eGRI says resistor-only packs can be custom designed from commonly available values, with or without a case.\u003c\/li\u003e\n\u003cli\u003eThe related 6644 uses 5% carbon film resistors in a brown 50R case with 2 blue and 2 black 12″ leads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 6644T\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Resistor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaged Quantity:\u003c\/strong\u003e 10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMake sure the resistor values match what your alarm panel expects for its contact circuits before you wire the pack in. Land the conductors firmly on the terminal block and check the circuit after wiring.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112531677,"sku":"KB-6644-T","price":51.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/77.jpg?v=1787760131"},{"product_id":"gri-4400-industrial-surface-mount-switch-set-standard-gap-closed-loop-1","title":"GRI 4400 Industrial Surface Mount Switch Set, Standard Gap, Closed Loop","description":"\u003cp\u003eThe GRI 4400 is an industrial surface mount switch set from GRI, supplied in a standard gap, closed loop configuration. It is a magnetic contact switch set for monitoring a door, window or other opening as part of a security installation. It suits installers and businesses that need a surface-mounted contact in an industrial setting.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 4400\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Industrial Surface Mount Switch Set\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e Standard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCircuit:\u003c\/strong\u003e Closed Loop\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch and magnet on the surface of the door or frame so they sit square to each other, and check alignment with the opening fully closed. Wire it into a closed loop zone and test that the zone reports correctly when the opening is moved.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112564445,"sku":"KB-4400","price":80.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/76.jpg?v=1787760132"},{"product_id":"gri-4473-w-3-4-switch-3-8-magnet-recessed-switch-set-press-fit-1-2-standard-gap-10w-200vdc-0-50a-closed-loop-n-o-and-screw-terminals-white","title":"GRI 4473-W 3\/4\" Switch 3\/8\" Magnet Recessed Switch Set, Press Fit, 1\/2\" Standard Gap, 10W, 200VDC, 0.50A, Closed Loop, N\/O, and Screw Terminals, White","description":"\u003cp\u003eThe GRI 4473-W is a white, wired recessed magnetic contact switch set for doors and windows, built for installers and homeowners who want a concealed sensor. It pairs a 3\/4″ press-fit switch with a 3\/8″ rare earth magnet from GRI's Mighty Mag Series, which is under 1\/8″ high and meant for the thinner vinyl windows where drilling can cause damage. The closed-loop, normally open design and hermetically sealed construction make it a straightforward choice for wired alarm circuits.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Mighty Mag Series magnet is less than 1\/8″ high, so it installs quickly without risking damage to thin vinyl windows.\u003c\/li\u003e\n\u003cli\u003eA rare earth alloy lets GRI shrink the magnet while keeping or improving the gap.\u003c\/li\u003e\n\u003cli\u003ePaired with GRI's 3\/8″ press-to-fit contacts, the series offers a standard gap of 3\/4″+ and 1″+ on wide gaps.\u003c\/li\u003e\n\u003cli\u003eThe switch is hermetically sealed, and its plated contacts resist sticking or freezing.\u003c\/li\u003e\n\u003cli\u003eThe recessed 3\/4″ switch press-fits into place and uses a closed loop.\u003c\/li\u003e\n\u003cli\u003eConnection is by 12″ #22AWG leads or screw terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 4473-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct series:\u003c\/strong\u003e 4473\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch size:\u003c\/strong\u003e 3\/4″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMagnet size:\u003c\/strong\u003e 3\/8″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation style:\u003c\/strong\u003e Press fit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 0.50″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoop:\u003c\/strong\u003e Closed loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTerminations:\u003c\/strong\u003e Screw terminals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.50A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill clean, correctly sized holes for the switch and magnet so each press-fits snugly, and keep the two aligned across the gap. After wiring, test the circuit with the door or window open and closed before sealing up the frame.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112597213,"sku":"KB-4473-W","price":48.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/75.jpg?v=1787760133"},{"product_id":"gri-4532-36-4532-series-floor-mount-miniature-overhead-door-switch-set-2-1-2-gap-10w-200vdc-0-50-amp-closed-loop-n-o-with-36-lead-and-2-stainless-steel-armored-cable-aluminum","title":"GRI 4532-36 4532 Series Floor Mount Miniature Overhead Door Switch Set, 2-1\/2\" Gap, 10W, 200VDC, 0.50 Amp, Closed Loop, N\/O, with 36\" Lead and 2' Stainless-Steel Armored Cable, Aluminum","description":"\u003cp\u003eThe GRI 4532-36 is a miniature floor mount overhead door switch set from GRI (George Risk Industries), built to monitor the position of an overhead door. It suits installers, businesses and homeowners who need a compact magnetic contact for a loose-fitting overhead door. It stands out with a cast aluminum casing, a hermetically sealed switch and a stainless-steel armored cable.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe miniature floor mount design keeps the switch small and the cost low.\u003c\/li\u003e\n\u003cli\u003eUniversal fit mounting holes and a universal magnet give you flexibility in how you mount it.\u003c\/li\u003e\n\u003cli\u003eCast aluminum casings are made for harsh environments.\u003c\/li\u003e\n\u003cli\u003eThe two-foot stainless-steel armored cable protects the wiring, and longer leads are available on request.\u003c\/li\u003e\n\u003cli\u003eIt is intended for loose overhead doors.\u003c\/li\u003e\n\u003cli\u003eThe switch is hermetically sealed, and an optional \"L\" bracket is available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 4532-36\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 4532\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic contact, floor mount overhead door switch set\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Overhead door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 2-1\/2″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e N\/O (Normally Open), Form A, closed loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput voltage:\u003c\/strong\u003e 200V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput current:\u003c\/strong\u003e 0.50 Amp (500mA)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead length:\u003c\/strong\u003e 36″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable:\u003c\/strong\u003e 2′ stainless-steel armored\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Cast aluminum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Freestanding\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e End of Line (EOL) resistor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch and magnet on the floor so the door closes within the standard gap, and confirm the door's movement doesn't push the magnet out of range. Route the armored cable out of the path of the door and test the circuit before you finish.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112629981,"sku":"KB-4532-36","price":77.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/74_273d14ed-a3a0-4506-a30e-49b55b1d2158.jpg?v=1787760135"},{"product_id":"gri-gr3045-panic-switch-set-with-screw-terminals","title":"GRI GR3045 Panic Switch Set with Screw Terminals","description":"\u003cp\u003eThe GRI GR3045 is a hard wire panic switch set with screw terminals, made by George Risk Industries (GRI). It triggers an alarm from a desk or counter, so it suits businesses and installers who need a discreet manual activation point. It mounts underneath or on the side of a desk or counter, in a horizontal or vertical orientation.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe GR3045 is a hard wire switch that controls an alarm function.\u003c\/li\u003e\n\u003cli\u003eInstallation is described as easy.\u003c\/li\u003e\n\u003cli\u003eIt mounts underneath a desk or counter.\u003c\/li\u003e\n\u003cli\u003eIt can also mount on the side of a desk or counter.\u003c\/li\u003e\n\u003cli\u003eIt can be mounted horizontally or vertically.\u003c\/li\u003e\n\u003cli\u003eScrew terminals handle the wiring connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e GR3045\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e 1801~George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Hard Wire Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControllable Function:\u003c\/strong\u003e Alarm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003ePick a mounting spot that is easy to reach by hand but out of sight from the customer side of the desk or counter. Make sure the screw terminal connections are tight and test the switch with the alarm panel before handing the system over.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112662749,"sku":"KB-GR3045","price":74.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/73.jpg?v=1787760136"},{"product_id":"gri-4400a-48-industrial-surface-mount-switch-set-2-1-2-standard-gap-10w-200vdc-0-50a-closed-loop-n-o-and-48-armored-cable-aluminum","title":"GRI 4400A-48 Industrial Surface Mount Switch Set, 2-1\/2\" Standard Gap, 10W, 200VDC, 0.50A, Closed Loop, N\/O, and 48\" Armored Cable, Aluminum","description":"\u003cp\u003eThe GRI 4400A-48 is an industrial surface mount magnetic contact switch set with a 48″ armored cable and a weather resistant gray aluminum housing. It monitors the open or closed position of gates, doors and similar openings, and it suits installers and businesses securing commercial and industrial sites. It stands out for its 2-1\/2″ standard gap and rugged, US-made construction.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUL and ULC approved.\u003c\/li\u003e\n\u003cli\u003eArmored cable protects the leads on exposed runs.\u003c\/li\u003e\n\u003cli\u003eWeather resistant aluminum housing is built for outdoor use.\u003c\/li\u003e\n\u003cli\u003eStandard gap reaches 2-1\/2″, with a DPDT option at the same gap.\u003c\/li\u003e\n\u003cli\u003eWorks well for securing chain link fence.\u003c\/li\u003e\n\u003cli\u003eOptional mounting brackets are available, and longer leads or jacketed cable can be requested.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 4400A-48\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct series:\u003c\/strong\u003e 4400\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Industrial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Commercial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e Closed Loop, N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact form:\u003c\/strong\u003e Form A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 2.50″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.50A (500mA)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable:\u003c\/strong\u003e 48″ armored\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 2.60″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 0.60″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e End of Line (EOL) Resistor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch and magnet on the fixed frame and moving leaf so they line up squarely and stay within the rated gap when the opening is closed. Route the armored cable clear of pinch points and moving parts, and test the loop after mounting.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112695517,"sku":"KB-4400A-48","price":151.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/72.jpg?v=1787760137"},{"product_id":"gri-400wg-400-series-industrial-surface-mount-switch-set-3-1-4-wide-gap-10w-160vdc-0-40a-closed-loop-n-o-and-concealed-screw-terminals-white","title":"GRI 400WG 400 Series Industrial Surface Mount Switch Set, 3-1\/4\" Wide Gap, 10W, 160VDC, 0.40A, Closed Loop, N\/O, and Concealed Screw Terminals, White","description":"\u003cp\u003eThe GRI 400WG is a 400 Series industrial surface mount switch set with a 3-1\/4″ wide gap, finished in white. It is a normally open, closed loop switch that suits installers who need a surface mount contact for industrial or commercial openings. Concealed screw terminals keep the wiring out of sight.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 400WG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 400 Series\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e 3-1\/4″ wide gap\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 160VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.40A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e Closed loop, N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTerminals:\u003c\/strong\u003e Concealed screw terminals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch and magnet on the same surface plane and keep them aligned across the gap. Confirm the switch state with a meter or the panel before closing up the wiring.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112728285,"sku":"KB-400WG","price":55.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/71_092c8cb7-ee43-476b-96ba-3b7791222ea7.jpg?v=1787760139"},{"product_id":"gri-pbf-100-3-4-diameter-1-1-2-push-button-switch-with-flange-10w-200vdc-0-50-amp-closed-loop-n-o-a-white","title":"GRI PBF-100 3\/4\" Diameter 1 1\/2\" Push Button Switch with Flange, 10W, 200VDC, 0.50 Amp, Closed Loop, N\/O, A, White","description":"\u003cp\u003eThe GRI PBF-100 is a white push button switch with a flange, built around a normally open, closed loop contact. It suits installers who need a simple momentary-style control input for a low-voltage circuit, such as a door or access control application. The 3\/4″ diameter and 1 1\/2″ size are written in the title, so confirm the fit against your mounting opening.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PBF-100\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Push Button Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/4″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 1 1\/2″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.50 Amp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact:\u003c\/strong\u003e Closed Loop, N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eKeep the load within the listed voltage, current and wattage ratings, and mount the flange flush against a clean, solid surface. Test the normally open contact with a meter before connecting it to the panel or controller.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112793821,"sku":"KB-PBF-100","price":55.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/69.jpg?v=1787760143"},{"product_id":"gri-s-12-short-l-bracket-for-overhead-doors-aluminum","title":"GRI S-12 Short L-Bracket for Overhead Doors, Aluminum","description":"\u003cp\u003eThe GRI S-12 is a short aluminum L-bracket made by George Risk Industries (GRI) for mounting magnetic contacts on overhead doors. It gives installers a rigid mounting point for a contact on a door or wall, and it suits both professional installers and DIY users. It is made in the US and works with several GRI contact series and the 8297-Kit Industrial Track Mount.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmall L-shaped aluminum bracket that holds a magnetic contact in position.\u003c\/li\u003e\n\u003cli\u003eDesigned for overhead door applications.\u003c\/li\u003e\n\u003cli\u003eCan also be used for door or wall mounting.\u003c\/li\u003e\n\u003cli\u003eFits GRI 28\/29, 250, 4400 Series, M-4400, M-250 and M-280 magnetic contacts.\u003c\/li\u003e\n\u003cli\u003eWorks with the GRI 8297-Kit Industrial Track Mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e S-12\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct name:\u003c\/strong\u003e Small \"L\" Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Mounting Bracket\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\/usage:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDevice supported:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GRI 8297-Kit Industrial Track Mount; GRI Magnetic Contacts: 28\/29, 250, 4400 Series, M-4400, M-250, M-280\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eFasten the bracket securely to a stable surface so the contact stays aligned with its magnet as the door moves. After mounting, open and close the door through its full travel and test the contact to confirm it signals reliably.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112826589,"sku":"KB-S-12","price":53.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/67.jpg?v=1787760144"},{"product_id":"gri-n20rs-t-series-switch-set-mm-400-rare-earth-magnet-paired-with-s20rs-t-b-press-to-fit-contact-brown-min-order-qty-of-12","title":"GRI N20RS-T Series Switch Set, MM-400 Rare Earth Magnet Paired with S20RS-T-B Press to Fit Contact, Brown (Min Order Qty of 10)","description":"\u003cp\u003eThe GRI Mighty Mag MM-400 is a nickel-plated rare earth magnet for magnetic contact switches, made by George Risk Industries. It is the magnet half of the N20RS-T Series Switch Set, which pairs it with the S20RS-T-B press-to-fit contact in brown. It suits installers and DIY users who want a quicker, easier window installation.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHelps solve problem window installations.\u003c\/li\u003e\n\u003cli\u003eSaves time during installation.\u003c\/li\u003e\n\u003cli\u003eNickel plating protects the magnet from chipping and corrosion.\u003c\/li\u003e\n\u003cli\u003eRare earth construction in a small 3\/8″ diameter, 1\/8″ long body.\u003c\/li\u003e\n\u003cli\u003eSupplied as a switch set pairing the MM-400 magnet with the S20RS-T-B press-to-fit contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e MM400\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Model:\u003c\/strong\u003e MM-400\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Mighty Mag\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact Magnet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.375″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 0.1″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 0.4″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm Factor:\u003c\/strong\u003e Surface Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Surface Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the magnet and the contact close together on the moving and fixed parts of the window, with the two aligned and facing each other. Test the switch with the window opened and closed before finishing the install.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112859357,"sku":"KB-N20RS-T","price":55.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/65.jpg?v=1787760145"},{"product_id":"gri-mm-400-rare-earth-mighy-magnet-3-8-diameter-1-8-l-nickel-plated-min-order-qty-of-10","title":"GRI MM-400 Rare Earth Mighy Magnet, 3\/8\" Diameter 1\/8\" L, Nickel Plated (Min Order Qty of 10)","description":"\u003cp\u003eThe GRI MM-400 (model MM400) is a Mighty Mag rare earth magnetic contact magnet from George Risk Industries, built for window installs where a standard magnet is hard to fit. Its small 0.375″ diameter makes it a fit for installers, businesses and homeowners who want a faster, easier job. The nickel plating protects it from chipping and corrosion.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to solve problem window installations.\u003c\/li\u003e\n\u003cli\u003eHelps save time on installs.\u003c\/li\u003e\n\u003cli\u003eNickel plated to protect against chipping.\u003c\/li\u003e\n\u003cli\u003eNickel plating also protects against corrosion.\u003c\/li\u003e\n\u003cli\u003ePart of GRI's Mighty Mag product line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e MM400\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Model:\u003c\/strong\u003e MM-400\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Line:\u003c\/strong\u003e Mighty Mag\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact Magnet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.375″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 0.1″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 0.4″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm Factor:\u003c\/strong\u003e Surface Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Surface Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the magnet on a clean, dry surface on the moving part of the window, and line it up with its matching contact before fixing it in place. Test the alignment with the window opened and closed before you finish the job.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356112990429,"sku":"KB-MM-400","price":51.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/62.jpg?v=1787760148"},{"product_id":"gri-pb-2020-w-3-8-diameter-push-button-plunger-switch-10w-200vdc-0-50a-closed-loop-n-o-a-white","title":"GRI PB-2020-W 3\/8\" Diameter Push Button Plunger Switch, 10W, 200VDC, 0.50A, Closed Loop, N\/O, A, White","description":"\u003cp\u003eThe GRI PB-2020-W is a 3\/8″ diameter push button plunger switch from George Risk Industries, built to detect when a door, drawer or panel is opened or closed. It suits residential installs where space is tight, since it fits in a single drill hole and uses a press-to-fit mounting. A closed loop contact and an adjustable screw plunger let you fine-tune the activation point.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompact 3\/8″ diameter body mounts in a single drill hole.\u003c\/li\u003e\n\u003cli\u003ePress-to-fit design keeps installation simple.\u003c\/li\u003e\n\u003cli\u003eAdjustable screw plunger lets you set how the switch activates.\u003c\/li\u003e\n\u003cli\u003eClosed loop contact type.\u003c\/li\u003e\n\u003cli\u003eConnects with 12″ 22AWG leads or screw terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PB-2020-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Series:\u003c\/strong\u003e PB-2020\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Plunger Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.50A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Type:\u003c\/strong\u003e Closed Loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Configuration:\u003c\/strong\u003e N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill a clean hole for the switch body and press it into place, then adjust the screw plunger so it engages reliably when the door or panel closes. Test the circuit after adjusting, and keep wire runs neat and terminations secure whether you use the leads or the screw terminals.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356113023197,"sku":"KB-PB-2020-W","price":49.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/61.jpg?v=1787760149"},{"product_id":"gri-mmf-875-rare-earth-magnet-1-8-3-8-7-8-nickel-plated","title":"GRI MMF-875 Rare Earth Magnet, 1\/8\" 3\/8\" 7\/8\", Nickel Plated","description":"\u003cp\u003eThe GRI MMF-875 is a nickel-plated rare earth magnet from George Risk Industries, made for window installs. It is a screw-mount contact magnet that suits installers and DIY users alike, and it is made in the US.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to solve the problems that come up with window installs.\u003c\/li\u003e\n\u003cli\u003eHelps save time during installation.\u003c\/li\u003e\n\u003cli\u003eScrew-mount form factor for a fixed, secure attachment.\u003c\/li\u003e\n\u003cli\u003eNickel-plated material with a gold finish.\u003c\/li\u003e\n\u003cli\u003eSuits both DIY and professional installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e MMF-875\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact Magnet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\/Usage:\u003c\/strong\u003e Window\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Gold\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Nickel Plated\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm Factor:\u003c\/strong\u003e Screw Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Screw Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 0.90″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 0.10″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 0.40″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eFasten the magnet with screws on a clean, solid surface of the window, and keep it aligned with its mating contact so the two sit close together when the window is closed. Test the setup with the window opened and closed before finishing the install.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356113088733,"sku":"KB-MMF-875","price":47.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/57.jpg?v=1787760151"},{"product_id":"gri-pa-75-w-10-recessed-adapter-3-4-diameter-with-3-8-hole-white-min-order-qty-of-10","title":"GRI PA-75-W-10 Recessed Adapter, 3\/4\" Diameter with 3\/8\" Hole, White (Min Order Qty of 10)","description":"\u003cp\u003eThe GRI PA-75-W-10 is a white recessed adapter from GRI (George Risk Industries) with a 3\/4″ diameter and a 3\/8″ hole. It snaps into place and holds itself with a self-locking design, so it suits installers and homeowners fitting recessed-mount parts. It can be snapped out and reused, which helps in areas with frequent lightning.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits a 3\/8″ machine hole.\u003c\/li\u003e\n\u003cli\u003eSelf-locking design keeps the adapter in place once seated.\u003c\/li\u003e\n\u003cli\u003eSnaps in and snaps out for easy installation and removal.\u003c\/li\u003e\n\u003cli\u003eReusable, which suits areas with frequent lightning.\u003c\/li\u003e\n\u003cli\u003eAlso offered in black, mahogany and gray; this listing is white.\u003c\/li\u003e\n\u003cli\u003eSold in a minimum order quantity of 10.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PA-75-W-10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Recessed Adapter\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.75″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm Factor:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill or confirm the mounting hole is clean and sized correctly before pressing the adapter in, so it seats fully and locks. If you need to remove it later, snap it out gently rather than prying, so it stays usable.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356113154269,"sku":"KB-PA-75-W-10","price":45.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/56.jpg?v=1787760153"},{"product_id":"gri-m-180wg-w-magnet-in-case-3-4-diameter-steel-door-recessed-white","title":"GRI M-180WG-W Magnet in Case, 3\/4\" Diameter, Steel Door, Recessed, White","description":"\u003cp\u003eThe GRI M-180WG-W is a recessed steel door magnet in a white case, made by George Risk Industries. It is the magnet half of a recessed magnetic contact, and it suits commercial installations where the contact is hidden inside a steel door. The 3\/4″ diameter case is made in the United States.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe stated dimensions apply to the case, not the magnet inside it.\u003c\/li\u003e\n\u003cli\u003eThe case comes in white, brown or gray.\u003c\/li\u003e\n\u003cli\u003eThis listing is for the white version.\u003c\/li\u003e\n\u003cli\u003eThe recessed design is intended for steel doors.\u003c\/li\u003e\n\u003cli\u003eThe magnets are only sold in bags of 100.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e M-180WG-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Security Device Magnet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.75″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Commercial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US (subject to change)\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill the recess to suit the 3\/4″ case so it sits cleanly in the steel door. Line the magnet up with its matching sensor on the frame, and test the alignment with the door closed before you finish the install.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356113252573,"sku":"KB-M-180WG-W","price":49.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/59.jpg?v=1787760154"},{"product_id":"gri-paa-recessed-pool-access-alarm-etl-listed","title":"GRI PAA Recessed Pool Access Alarm, ETL Listed,","description":"\u003cp\u003eThe GRI PAA is a recessed pool access alarm that sounds when a door leading to the pool is opened, helping keep children away from the water. It suits homeowners, installers and businesses that need a flush-mount door alarm with ETL Listing and a choice of wired or battery power. Its jumper-pin options let you set the loop type, entry delay and adult shunt time to suit the door.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt is ETL Listed.\u003c\/li\u003e\n\u003cli\u003eIt can be hard wired or run on a 9V lithium battery.\u003c\/li\u003e\n\u003cli\u003eJumper pins let you choose a closed or open loop.\u003c\/li\u003e\n\u003cli\u003eYou can set it to sound instantly or after a seven second delay.\u003c\/li\u003e\n\u003cli\u003eThe adult shunt can be set to 15 or 7 seconds.\u003c\/li\u003e\n\u003cli\u003eA child resistant button guard is built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PAA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pool Alarm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\/Usage:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity Technology:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm Factor:\u003c\/strong\u003e Flush Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Flush Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSound Emission:\u003c\/strong\u003e 85dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 12V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible GRI Sounders:\u003c\/strong\u003e PAA-RS, PAA-RSB, PAA-SS, PAA-SSB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eSet the jumper pins for loop type, delay and shunt time before closing up the unit, and confirm the settings match how the door will be used. If you wire it, check the 12V DC supply and cable run before mounting, and test the alarm and shunt with the door in its final position.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356113481949,"sku":"KB-PAA","price":248.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/58.jpg?v=1787760156"},{"product_id":"gri-n150-t-w-1-2-switch-set-standard-gap-of-up-to-1-terminal-connection-closed-loop-white","title":"GRI N150-T-W 1\/2\" Switch Set, Standard Gap of up to 1\", Terminal Connection, Closed Loop, White","description":"\u003cp\u003eThe GRI N150-T-W is a miniature surface mount magnetic contact switch set with a 1\/2″ diameter, finished in white. It is a closed loop contact with a standard gap of up to 1″, intended for door and window openings where a small, low-profile sensor is needed. The rare earth magnets and press-to-fit contacts make it a good match for problem installs, and it suits both DIY and professional installers.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRare earth magnets are paired with press-to-fit contacts.\u003c\/li\u003e\n\u003cli\u003eIt is designed to solve problem installs.\u003c\/li\u003e\n\u003cli\u003eThe press-to-fit design helps save time on installations.\u003c\/li\u003e\n\u003cli\u003eNickel plating protects the contact from chipping and corrosion.\u003c\/li\u003e\n\u003cli\u003ePairing a standard gap switch with the MM-600 achieves a wide gap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e N150-T-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Type:\u003c\/strong\u003e Closed Loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e Terminal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1\/2″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Gap:\u003c\/strong\u003e 1.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch and magnet on the door or window and its frame so they sit directly opposite each other, and keep the spacing within the standard gap. Test the closed loop circuit with the opening both closed and open before finishing the wiring and covering the terminals.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356113514717,"sku":"KB-N150-T-W","price":50.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/54.jpg?v=1787760157"},{"product_id":"gri-199-12-b-1-steel-door-recessed-switch-set-standard-gap-5w-175vdc-0-25-amp-dpdt-x-2-brown","title":"GRI 199-12-B 1\" Steel Door Recessed Switch Set, Standard Gap, 5W, 175VDC, 0.25 Amp, DPDT, X 2, Brown","description":"\u003cp\u003eThe GRI 199-12-B is a recessed magnetic contact switch set for steel doors, built for commercial wired alarm and access installations. It is a 1″ diameter, brown, DPDT (Form C) set with 12″ leads and a 0.50″ standard gap, suited to installers who need a concealed contact on steel doors. The one-piece, self-locking design and UL approval make it a dependable fit for professional installs.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSolid, one-piece construction keeps the switch simple to handle and install.\u003c\/li\u003e\n\u003cli\u003eThe self-locking design holds the switch in place once it is seated.\u003c\/li\u003e\n\u003cli\u003eIt carries UL and ULC approval.\u003c\/li\u003e\n\u003cli\u003eThe series is offered in closed loop, open loop and SPDT versions, and in white, brown, grey or black.\u003c\/li\u003e\n\u003cli\u003eMounting is available in 3\/4″ and 1″ diameters, with standard 12″ leads or terminals.\u003c\/li\u003e\n\u003cli\u003eThe series is backed by a lifetime coverage program from the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 199-12-B\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e Set of 2 (per title)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 12.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 0.50″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e DPDT (Double Pole Double Throw)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact form:\u003c\/strong\u003e Form C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower rating:\u003c\/strong\u003e 5W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 175VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.25 Amp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e End of Line (EOL) Resistor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCertifications:\u003c\/strong\u003e UL\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Commercial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill the recess to match the 1″ diameter and seat the switch and magnet so they align across the gap on the steel door. Test the loop after wiring, with the door open and closed, before you close up the frame.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356113547485,"sku":"KB-199-12-B","price":67.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/53.jpg?v=1787760158"},{"product_id":"gri-m-100-surface-mounted-miniature-tab-magnet-in-casing-brown-min-order-qty-of-10","title":"GRI M-100 Surface Mounted Miniature Tab Magnet in Casing, Brown (Min Order Qty of 10)","description":"\u003cp\u003eThe GRI M-100 (model M-100-B) is a brown miniature magnet from George Risk Industries, made to pair with a magnetic contact sensor on a door or window. It mounts on the surface with screws and also has an adhesive backing, and its small profile suits residential installs. Note that this listing is for a minimum order of 10 magnets.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrown finish for a low-profile look on matching trim.\u003c\/li\u003e\n\u003cli\u003eMiniature magnet in a casing for surface mounting.\u003c\/li\u003e\n\u003cli\u003eAdhesive backing is included on the magnet.\u003c\/li\u003e\n\u003cli\u003eCan also be secured with screws for surface mounting.\u003c\/li\u003e\n\u003cli\u003eMagnets are only available in bags of 100.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e M-100-B\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Model:\u003c\/strong\u003e M-100\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact Magnet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Adhesive Backing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 0.40″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 0.30″\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the magnet on the moving part of the door or window, aligned with its matching contact sensor on the frame. Clean the surface before using the adhesive, and use the screw option where a more secure hold is needed.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356113580253,"sku":"KB-M-100","price":51.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/52.jpg?v=1787760159"},{"product_id":"gri-pb-2020-t-w-3-8-diameter-plunger-switch-with-terminals-10w-200vdc-0-50a-closed-loop-n-o-a-white","title":"GRI PB-2020-T-W 3\/8\" Diameter Plunger Switch with Terminals, 10W, 200VDC, 0.50A, Closed Loop, N\/O, A, White","description":"\u003cp\u003eThe GRI PB-2020-T-W is a 3\/8″ diameter plunger switch with a closed loop contact, built to detect when a door or window is opened. It suits residential security installs where a compact, press-to-fit switch is needed, and it comes in white with screw terminals. The PB-2020 series from George Risk Industries stands out for its short, compact package and single drill hole mounting.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe 3\/8″ diameter body fits in a single drill hole.\u003c\/li\u003e\n\u003cli\u003eIt is a press-to-fit design with an adjustable screw plunger.\u003c\/li\u003e\n\u003cli\u003eConnections are made with standard 12″ leads or a terminal block.\u003c\/li\u003e\n\u003cli\u003eLonger leads and zip cord can be requested.\u003c\/li\u003e\n\u003cli\u003eSupervisory loops are available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PB-2020-T-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Series:\u003c\/strong\u003e PB-2020\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Plunger Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Type:\u003c\/strong\u003e Closed Loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnection:\u003c\/strong\u003e 12″ 22AWG leads or screw terminals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill a single hole for the switch, press it into place, and use the adjustable screw plunger to set the activation point against the door or window. Test the closed loop with the door or window both open and closed before finishing the wiring run.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356114727133,"sku":"KB-PB-2020-T-W","price":54.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/51.jpg?v=1787760161"},{"product_id":"gri-paa-s-surface-mount-pool-access-alarm-etl-listed","title":"GRI PAA-S Surface Mount Pool Access Alarm, ETL Listed","description":"\u003cp\u003eThe GRI PAA-S is a surface mount pool access alarm that sounds when a door leading to a pool is opened. It suits homeowners, installers and businesses who need a code-compliant barrier alarm that can run on hard-wired power or a 9V lithium battery. Its jumper-selectable options and built-in child-resistant button guard let you set it up to match the site.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eETL Listed, and tested to UL 2017 and Florida Building Commission Code requirements under ETL listing number 3035022.\u003c\/li\u003e\n\u003cli\u003eRuns hard wired or on a 9V lithium battery.\u003c\/li\u003e\n\u003cli\u003eJumper pins set the options, including closed or open loop and instant-on or seven-second delay.\u003c\/li\u003e\n\u003cli\u003eOffers a 15 or 7 second adult shunt.\u003c\/li\u003e\n\u003cli\u003eIncludes a built-in child-resistant button guard.\u003c\/li\u003e\n\u003cli\u003eRemote sounders, remote shunt buttons and a combination remote sounder\/shunt button are available separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PAA-S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e 1801~George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pool Alarm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\/Usage:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity Technology:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eForm Factor:\u003c\/strong\u003e Flush Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Flush Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSound Emission:\u003c\/strong\u003e 85dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GRI Sounders: PAA-RS, PAA-RSB, PAA-SS, PAA-SSB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eSet the jumper pins for loop type, delay and shunt time before mounting, and confirm the settings meet your local pool barrier code. If you are using the hard-wired option, run the cabling before final mounting; if you are using battery power, install the battery and test the alarm and shunt button before leaving the site.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356114792669,"sku":"KB-PAA-S","price":278.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/50.jpg?v=1787760163"},{"product_id":"gri-20rs-12xwg-w-20rs-series-3-8-short-press-fit-recessed-switch-set-1-extra-wide-gap-10w-200vdc-0-50-amp-closed-n-o-a-white","title":"GRI 20RS-12XWG-W 20RS Series 3\/8\" Short Press Fit Recessed Switch Set, 1\" Extra Wide Gap, 10W, 200VDC, 0.50 Amp, Closed, N\/O, A, White","description":"\u003cp\u003eThe GRI 20RS-12XWG-W is a recessed magnetic contact switch set from the 20RS Series, built to monitor a door in a wired security system. The \"shortie\" body is only 0.63″ long, which suits openings where a full-length 3\/8″ press-fit set won't fit, such as thin-framed doors and windows. It has an extra wide 1.00″ gap and a white finish.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe 3\/8″ diameter body presses into a drilled hole, so no mounting hardware is needed.\u003c\/li\u003e\n\u003cli\u003eThe short, recessed design suits thin-framed doors and windows where space is tight.\u003c\/li\u003e\n\u003cli\u003eThe switch is hermetically sealed, and its plated contacts resist sticking or freezing.\u003c\/li\u003e\n\u003cli\u003eIt is UL and ULC approved.\u003c\/li\u003e\n\u003cli\u003eStandard leads are 12″, or you can choose a terminal block. Longer leads, zip cord or jacketed cable are available on request.\u003c\/li\u003e\n\u003cli\u003eBuilt-in resistors and diodes are available on request, and switches or magnets can be bought separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 20RS-12XWG-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 20RS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact form:\u003c\/strong\u003e Form A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRating:\u003c\/strong\u003e 10W, 200VDC, 0.50 Amp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 1.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.40″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 0.63″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill a clean hole for the press-fit switch and seat it fully, then align the magnet across the gap so the contact changes state reliably when the door moves. Connect the leads to the alarm zone and test the loop with the door open and closed before closing up the frame.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356115448029,"sku":"KB-20RS-12XWG-W","price":54.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/49.jpg?v=1787760163"},{"product_id":"gri-200-36-200-series-floor-mount-industrial-overhead-door-switch-set-2-1-2-gap-10w-200vdc-0-50-amp-closed-loop-n-o-and-36-stainless-steel-armored-cable-aluminum","title":"GRI 200-36 200 Series Floor Mount Industrial Overhead Door Switch Set, 2-1\/2\" Gap, 10W, 200VDC, 0.50 Amp, Closed Loop, N\/O, and 36\" Stainless-Steel Armored Cable, Aluminum","description":"\u003cp\u003eThe GRI 200-36 is a floor mount industrial overhead door switch set from the GRI 200 Series. It is a closed-loop, normally open (N\/O) switch that senses overhead door position, and it comes with a 36″ stainless-steel armored cable. It suits installers who need a durable switch in an aluminum housing for industrial door applications.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 200-36\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 200 Series\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Floor mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e 2-1\/2″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.50 Amp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCircuit:\u003c\/strong\u003e Closed loop, N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable:\u003c\/strong\u003e 36″ stainless-steel armored\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch on the floor where the door will meet it, and set the alignment so the door stays within the rated gap when closed. Route the armored cable so it is protected from traffic and pinch points, and test the switch through a full door cycle before putting it into service.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356115808477,"sku":"KB-200-36","price":80.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/48.jpg?v=1787760165"},{"product_id":"gri-190-12-w-3-4-steel-door-recessed-switch-set-standard-gap-5w-175vdc-0-25-amp-open-closed-spdt-c-white","title":"GRI 190-12-W 3\/4\" Steel Door Recessed Switch Set, Standard Gap, 5W, 175VDC, 0.25 Amp, Open\/Closed SPDT, C, White","description":"\u003cp\u003eThe GRI 190-12-W is a 3\/4″ recessed steel door switch set that uses a magnetic contact to report whether a door is open or closed. It suits commercial installers who want a wired, concealed contact for steel doors. Its solid one-piece, self-locking body and SPDT Form C output make it a straightforward choice for alarm and access-control wiring.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecessed mounting keeps the switch out of sight in a 3\/4″ diameter hole.\u003c\/li\u003e\n\u003cli\u003eThe one-piece, self-locking body is solid and holds firmly once installed.\u003c\/li\u003e\n\u003cli\u003eIt is UL and ULC approved.\u003c\/li\u003e\n\u003cli\u003eThe SPDT contact gives you both normally open and normally closed connections.\u003c\/li\u003e\n\u003cli\u003eStandard 12″ leads are included on this version.\u003c\/li\u003e\n\u003cli\u003eThe same family also comes in other colors, closed loop and open loop versions, and 1″ mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 190-12-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Recessed Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e SPDT (Single Pole Double Throw)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact form:\u003c\/strong\u003e Form C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 0.50″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower rating:\u003c\/strong\u003e 5W, 175VDC, 0.25 Amp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.80″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 12.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e End of Line (EOL) Resistor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Commercial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill a clean hole to suit the 3\/4″ switch, seat the switch fully, and keep the magnet aligned within the standard gap so the contact changes state reliably. Test the open and closed states at the panel before closing up the door and frame.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356116496605,"sku":"KB-190-12-W","price":55.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/46_25f09668-deff-4812-8f6d-e02b7d1358d6.jpg?v=1787760165"},{"product_id":"gri-5228-bushing-heyco-snap-2-diameter","title":"GRI 5228 Bushing Heyco Snap 2\" Diameter","description":"\u003cp\u003eThe GRI 5228 is a 2″ diameter Heyco snap cable bushing from George Risk Industries. It protects and finishes a cable pass-through, which makes it a practical choice for installers and electricians routing wire through panels and enclosures. It is made in the US.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 5228\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Cable Bushing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStyle:\u003c\/strong\u003e Heyco snap\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 2″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eConfirm the hole in the panel or enclosure matches the bushing before you snap it in, and seat it fully so it holds firmly. Deburr the edge of the opening and leave enough slack in the cable so it does not pull on the bushing.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356116562141,"sku":"KB-5228","price":45.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/47.jpg?v=1787760166"},{"product_id":"gri-184-12-184-series-1-steel-door-recessed-switch-set-standard-gap-10w-200vdc-0-40-amp-closed-loop-n-o-a-and-u-l-10c-fire-rated-brown","title":"GRI 184-12 184 Series 1\" Steel Door Recessed Switch Set, Standard Gap, 10W, 200VDC, 0.40 Amp, Closed Loop, N\/O, A, and U.L. 10C Fire Rated Brown","description":"\u003cp\u003eThe GRI 184-12 is a 184 Series recessed switch set for 1″ steel doors, used as a door-position contact in alarm and access control circuits. It has a standard gap, a normally open closed-loop contact, and U.L. 10C fire rating, and it comes in brown. It suits installers who need a concealed contact on a fire-rated steel door.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 184-12\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e 184\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Steel Door Recessed Switch Set\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoor thickness:\u003c\/strong\u003e 1″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e Standard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.40 Amp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCircuit:\u003c\/strong\u003e Closed loop, N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFire rating:\u003c\/strong\u003e U.L. 10C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill the recess holes cleanly in the steel door and frame, and line up the switch and magnet so they sit within the standard gap when the door is closed. Keep the loop within the listed 10W, 200VDC and 0.40 Amp limits, and test the contact with the door open and closed before you finish the job.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356117610717,"sku":"KB-184-12","price":55.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/44.jpg?v=1787760168"},{"product_id":"gri-rb-01-roller-ball-plunger-contact-closed-loop-a-reed-form-10w-brownd","title":"GRI RB-01 Roller Ball Plunger Contact, Closed Loop,A Reed Form, 10W, Brownd","description":"\u003cp\u003eThe GRI RB-01-W (RB-01 Plunger Switch) is a white, closed loop roller ball plunger contact from George Risk Industries. It pairs a magnetic reed with a mechanical plunger, so it gives you plunger action in a hermetically sealed switch. It suits doors and windows, where the ball is actuated as the sash slides into its frame, and it also works as a hidden trap device under a protected object.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCombines a magnetic reed with a mechanical plunger in a single package.\u003c\/li\u003e\n\u003cli\u003eThe reed is hermetically sealed.\u003c\/li\u003e\n\u003cli\u003eThe ball plunger can be activated from any direction within 360 degrees.\u003c\/li\u003e\n\u003cli\u003eIt responds to the sliding motion of a door or window closing into its frame.\u003c\/li\u003e\n\u003cli\u003eIt can be mounted on a flat surface, such as a display table, as an interior trap device.\u003c\/li\u003e\n\u003cli\u003eWith this use, the protected object sits directly on the switch, which conceals and actuates the roller ball.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e RB-01-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct series:\u003c\/strong\u003e RB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Plunger Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e Closed Loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Screw down flange\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContacts:\u003c\/strong\u003e Plated contacts resist sticking or freezing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents:\u003c\/strong\u003e RB-01 Plunger Switch, Mounting Hardware, Spacers\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch on a firm, flat surface with the screw down flange, and use the supplied spacers to fine-tune how far the ball sits from the door or window frame. Test the loop after mounting, and confirm the ball is actuated reliably as the door or window closes.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356117971165,"sku":"KB-RB-01","price":51.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/42.jpg?v=1787760171"},{"product_id":"gri-cb-20hd-call-button-open-loop-momentary-12v-dc","title":"GRI CB-20HD Call Button, Open Loop, Momentary, 12V DC","description":"\u003cp\u003eThe GRI CB-20HD is an open loop, momentary call button from George Risk Industries, built as a durable panic switch for 12V DC systems. It does one simple job: close an SPST contact when pressed so a connected alarm or call circuit can respond. Its compact 1.14″ x 2.25″ size suits installers and businesses who need a small, low-resistance call point.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen loop, momentary operation means the circuit closes only while the button is pressed.\u003c\/li\u003e\n\u003cli\u003eRated for 12V DC operation.\u003c\/li\u003e\n\u003cli\u003eSingle-pole, single-throw (SPST) configuration keeps wiring simple.\u003c\/li\u003e\n\u003cli\u003eMeasures 1.14″ x 2.25″, so it fits in tight spots.\u003c\/li\u003e\n\u003cli\u003eLow contact resistance of 0.1 Ohm and a current rating of 0.1A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e CB-20HD\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Series:\u003c\/strong\u003e CB-20\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Call Button Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperation:\u003c\/strong\u003e Open loop, momentary\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfiguration:\u003c\/strong\u003e SPST\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.14″ x 2.25″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e 0.1 Ohm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent Rating:\u003c\/strong\u003e 0.1A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the button where it is easy to reach and fixed firmly to the surface, and keep the switched current within the 0.1A rating. Test the call function after wiring to confirm the connected panel or device responds when the button is pressed.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356118921437,"sku":"KB-CB-20HD","price":72.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/39.jpg?v=1787760174"},{"product_id":"gri-pbf-2020-t-3-8-diameter-push-button-plunger-switch-with-flange-and-terminals-10w-200vdc-0-50a-closed-loop-n-o-a-white","title":"GRI PBF-2020-T 3\/8\" Diameter Push Button Plunger Switch with Flange and Terminals, 10W, 200VDC, 0.50A, Closed Loop, N\/O, A, White","description":"\u003cp\u003eThe GRI PBF-2020-T (model PBF-2020-T-W) is a white 3\/8″ push button plunger switch from George Risk Industries, built for residential installations that need a push-to-activate contact. It uses a closed loop contact with screw terminals and a flange, and the adjustable screw plunger lets you tune how it actuates. What stands out is the compact package, which GRI describes as the shortest and most compact available for a plunger-style switch.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt combines a plunger, push-to-activate function in a very compact package.\u003c\/li\u003e\n\u003cli\u003eThe plunger is an adjustable screw type.\u003c\/li\u003e\n\u003cli\u003eIt mounts with a single drill hole.\u003c\/li\u003e\n\u003cli\u003eA flange is included on this PBF version.\u003c\/li\u003e\n\u003cli\u003eScrew terminals handle the wiring connections.\u003c\/li\u003e\n\u003cli\u003eThe PB-2020 and PBF-2020 series is offered as a press fit or screw mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PBF-2020-T-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct series:\u003c\/strong\u003e PBF-2020\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Plunger Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e Closed Loop, N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.50A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTerminals:\u003c\/strong\u003e Screw terminals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Residential\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill the single mounting hole cleanly and check that the flange sits flat against the mounting surface. After wiring the screw terminals, adjust the plunger and test the loop with the door or panel closed and open before finishing the job.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356119380189,"sku":"KB-PBF-2020-T","price":54.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/38.jpg?v=1787760175"},{"product_id":"gri-pw-20-w-pre-wire-plug-3-8-diameter-1-3-4-l-white","title":"GRI PW-20-W Pre-Wire Plug, 3\/8\" Diameter 1-3\/4\" L, White","description":"\u003cp\u003eThe GRI PW-20-W is a white pre-wire plug from George Risk Industries, measuring 3\/8″ in diameter and 1-3\/4″ long. It is a small plug used when pre-wiring, and its white finish suits installs where a neutral look is wanted. It is made in the US and can be installed by either a DIY user or a professional.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWhite finish for a neutral appearance.\u003c\/li\u003e\n\u003cli\u003eCompact 3\/8″ diameter body.\u003c\/li\u003e\n\u003cli\u003eMeasures 1-3\/4″ in length.\u003c\/li\u003e\n\u003cli\u003eRated for both DIY and professional installation.\u003c\/li\u003e\n\u003cli\u003eMade in the US by George Risk Industries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PW-20-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Pre-Wire Plug\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 3\/8″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 1-3\/4″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 0.40″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eConfirm the hole size and depth match the plug before drilling, and test fit it during rough-in so it sits flush. Keep the wire routing tidy behind the plug so it is not pinched or stressed once the finish work is done.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356120166621,"sku":"KB-PW-20-W","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/GI-PW20WH.jpg?v=1787760176"},{"product_id":"gri-gi-e18012-180-series-3-4-steel-door-recessed-switch-set-standard-gap-10w-200vdc-0-40-amp-closed-loop-n-o-a-and-u-l-10c-fire-rated-brown","title":"GRI GI-E18012 180 Series 3\/4\" Steel Door Recessed Switch Set, Standard Gap, 10W, 200VDC, 0.40 Amp, Closed Loop, N\/O, A, and U.L. 10C Fire Rated, Brown","description":"\u003cp\u003eThe Alarm Controls 10C Guard Ring is an aluminum guard ring made for Alarm Controls push button switches. It suits installers and facility managers who need a guard fitted to a K-11 or K-13 push button. It is gray, 0.50″ high and made in the US.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eVendor:\u003c\/strong\u003e Alarm Controls by ASSA ABLOY\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 10C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Series:\u003c\/strong\u003e 10C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Guard Ring\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 0.50″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Alarm Controls Push Buttons K-11, K-13\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eConfirm that the push button is a K-11 or K-13 before you start, since those are the models listed as compatible. Fit the ring on a clean, flat mounting surface and check that it sits square around the button.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356120199389,"sku":"KB-GI-E18012","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/37.jpg?v=1787760177"},{"product_id":"gri-100-twg-miniature-surface-mount-switch-set-wide-gap-10w-160vdc-0-40a-closed-loop-n-o-and-3m-adhesive-tape-white","title":"GRI 100-TWG Miniature Surface Mount Switch Set, Wide Gap, 10W, 160VDC, 0.40A, Closed Loop, N\/O, and 3M Adhesive Tape, White","description":"\u003cp\u003eThe GRI 100-TWG (model 100-TWG-W) is a white, wired surface mount magnetic contact that watches a door or window and reports when it opens. It is a normally open, closed loop switch, hermetically sealed, with plated contacts that resist sticking or freezing. The Hybrid (DIY + Professional) installation type, screw-down flange or self-stick mounting, and a choice of leads or screw terminals make it a practical fit for both homeowners and installers.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLonger leads, or zip cord or jacketed cable, are available upon request.\u003c\/li\u003e\n\u003cli\u003eBuilt-in E.O.L. resistors and diodes can be added upon request.\u003c\/li\u003e\n\u003cli\u003eSwitches and magnets are available separately.\u003c\/li\u003e\n\u003cli\u003eThe hermetic seal and plated contacts help the switch resist sticking or freezing.\u003c\/li\u003e\n\u003cli\u003eMounts with a screw-down flange or self-stick, with 12″ #22 AWG leads or screw terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 100-TWG-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Model:\u003c\/strong\u003e 100-TWG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Series:\u003c\/strong\u003e 100\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount Type:\u003c\/strong\u003e Surface Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoop:\u003c\/strong\u003e Closed loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 160VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.40A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e Wide gap\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity Technology:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLeads:\u003c\/strong\u003e 12″ #22 AWG leads or screw terminals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Hermetically sealed\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaged Quantity:\u003c\/strong\u003e 10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e 100-TWG Magnetic Contact, covers, mounting hardware\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch on the fixed frame and the magnet on the moving door or window, keeping them aligned across the gap. Test the loop with the door or window open and closed before finishing the wiring run, and keep the switch rating in mind when connecting it to the panel.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356120789213,"sku":"KB-100-TWG","price":49.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/34.jpg?v=1787760180"},{"product_id":"gri-8080rs-t-w-3-4-recessed-stubby-steel-door-switch-set-with-terminals-5-8-gap-10w-200vdc-0-50a-closed-n-o-a-white","title":"GRI 8080RS-T-W 3\/4\" Recessed Stubby Steel Door Switch Set with Terminals, 5\/8\" Gap, 10W, 200VDC, 0.50A, Closed, N\/O, A, White","description":"\u003cp\u003eThe GRI 8080RS-T-W is a white recessed magnetic contact switch set built for steel doors. It uses a 3\/4″ stubby body with screw terminals, so you can wire it without splicing leads. It suits commercial door-monitoring installs, and it ships as a pack of 10 for larger jobs.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecessed magnetic contact designed for steel doors.\u003c\/li\u003e\n\u003cli\u003eScrew terminals let you connect the wiring directly to the switch.\u003c\/li\u003e\n\u003cli\u003eOffered in white, brown, gray or black; this one is white.\u003c\/li\u003e\n\u003cli\u003eMade as a closed loop version only.\u003c\/li\u003e\n\u003cli\u003eLonger leads, zip cord or jacketed cable, built-in E.O.L. resistors and diodes, and supervisory loops are available upon request.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 8080RS-T-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Model:\u003c\/strong\u003e 8080RS-T\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\/Usage:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Type:\u003c\/strong\u003e Commercial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity Technology:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Form:\u003c\/strong\u003e Form A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 200V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Current:\u003c\/strong\u003e 500mA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 10.0000W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 12.00″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 0.80″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e 5\/8″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaged Quantity:\u003c\/strong\u003e 10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill the mounting holes cleanly and seat the switch and magnet square in the door and frame so they stay aligned across the gap. Tighten the terminal screws firmly, then test the loop with the door opened and closed before putting the zone into service.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356121018589,"sku":"KB-8080RS-T-W","price":56.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/33.jpg?v=1787760181"},{"product_id":"gri-vs-06-6-linear-travel-vent-switch-set-with-1-2-air-gap-closed-loop","title":"GRI VS-06 6\" Linear Travel Vent Switch Set with 1\/2\" Air Gap, Closed Loop","description":"\u003cp\u003eThe GRI VS-06 is a wired, surface-mount magnetic contact vent switch with a 6″ linear travel and a 1\/2″ standard air gap. It lets a window be vented without breaking the alarm loop, so the system doesn't have to be disarmed to open or close the window. It suits installers and DIYers who want to help prevent false alarms on protected windows.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHelps prevent false alarms on vented windows.\u003c\/li\u003e\n\u003cli\u003eRemoves the need to disarm the system when opening or closing a window.\u003c\/li\u003e\n\u003cli\u003eCustom switch and lead lengths are available.\u003c\/li\u003e\n\u003cli\u003eClosed loop design with a normally open (N\/O) contact.\u003c\/li\u003e\n\u003cli\u003eComes with a 36″ zipcord lead as standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI (George Risk Industries)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e VS-06\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMount type:\u003c\/strong\u003e Surface Mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 0.50″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 6.52″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard switch length:\u003c\/strong\u003e 6″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead:\u003c\/strong\u003e 36″ zipcord, standard\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e NO (Normally Open)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e Closed loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum switching current:\u003c\/strong\u003e 0.500A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum switching voltage:\u003c\/strong\u003e 200V\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum contact rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eSurface-mount the switch and magnet on the window and frame so they stay aligned across the full travel, and keep the gap within the 1\/2″ standard. Route the zipcord lead neatly to the loop, and test the zone with the window closed and vented before leaving the job.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356121673949,"sku":"KB-VS-06","price":62.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/32.jpg?v=1787760183"},{"product_id":"gri-pac-2-b-2-4-k-resistors-brown","title":"GRI PAC-2-B 2.4.K Resistors, Brown","description":"\u003cp\u003eThe GRI PAC-2-B (model PAC2B4.7K) is a brown resistor from George Risk Industries, sold in a pack of 10. It is a resistor-only pack, so it suits installers retro-fitting existing devices who want to avoid soldering on the job. Made in the United States, it is offered in standard colors, and this pack is brown.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemoves the need to solder on the job.\u003c\/li\u003e\n\u003cli\u003eResistor-only packs are available for retro-fits.\u003c\/li\u003e\n\u003cli\u003eOffered in standard colors.\u003c\/li\u003e\n\u003cli\u003eBrown color in this pack.\u003c\/li\u003e\n\u003cli\u003eSupplied as a pack of 10.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e PAC2B4.7K\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Resistor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaged Quantity:\u003c\/strong\u003e 10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US (subject to change)\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eConfirm the resistor value on the pack matches what your system or zone expects before fitting it, since the title and model number list different values. Keep connections tight and tidy, and test the circuit after the retro-fit.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356121936093,"sku":"KB-PAC-2-B","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/31.jpg?v=1787760184"},{"product_id":"gri-29awg-surface-mount-magnetic-reed-switch-set-1-1-2-wide-gap-10w-160vdc-0-40a-closed-loop-n-o-and-side-mounted-screw-terminals-brown","title":"GRI 29AWG Surface Mount Magnetic Reed Switch Set, 1-1\/2\" Wide Gap, 10W, 160VDC, 0.40A, Closed Loop, N\/O, and Side Mounted Screw Terminals, Brown","description":"\u003cp\u003eThe GRI Surface Mount Magnetic Reed Switch Set is a brown, surface-mount door and window contact that reports an open or closed state to a security panel. It uses a wide 1-1\/2″ gap and a normally open, closed loop design, which suits installers who need extra clearance between the switch and magnet. Side-mounted screw terminals handle the wiring connections.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Surface Mount Magnetic Reed Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGap:\u003c\/strong\u003e 1-1\/2″ wide gap\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWire gauge:\u003c\/strong\u003e 29AWG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitch rating:\u003c\/strong\u003e 10W, 160VDC, 0.40A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e Closed loop, N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTerminals:\u003c\/strong\u003e Side mounted screw terminals\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the switch on the frame and the magnet on the moving door or window, keeping them aligned across the gap. Test the loop with the door open and closed at the panel before finishing the installation.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356121968861,"sku":"KB-29AWG","price":55.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/30.jpg?v=1787760186"},{"product_id":"gri-8612-g-switch-set-recessed-door-contact-with-2k-and-1k-resistor","title":"GRI 8612-G Switch Set, Recessed Door Contact with 2K and 1K Resistor","description":"\u003cp\u003eThe GRI 8612-G is a recessed door contact switch set from George Risk Industries, built to monitor door openings in a security system. It is a gray magnetic contact that mounts into the door and frame rather than on the surface, and it comes with 2K and 1K resistors. It suits installers and security system owners who want a straightforward door sensor.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecessed design for a door contact that sits within the door and frame.\u003c\/li\u003e\n\u003cli\u003eIncludes 2K and 1K resistors with the switch set.\u003c\/li\u003e\n\u003cli\u003eMagnetic contact type made for door applications.\u003c\/li\u003e\n\u003cli\u003eSuited to use in security systems.\u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 8612-G\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\/Usage:\u003c\/strong\u003e Door\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity Technology:\u003c\/strong\u003e Wireless\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill the recess holes cleanly and keep the switch and magnet aligned across the door gap so the contact reliably opens and closes. After mounting, walk-test the door and confirm the zone reports correctly on your panel.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356122231005,"sku":"KB-8612-G","price":54.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/29.jpg?v=1787760187"},{"product_id":"gri-20rs-12-3-8-short-press-fit-recessed-switch-set-5-8-length-1-2-standard-gap-10w-200vdc-0-50a-closed-loop-n-o-a-brown","title":"GRI 20RS-12 3\/8\" Short Press Fit Recessed Switch Set, 5\/8\" Length, 1\/2\" Standard Gap, 10W, 200VDC, 0.50A, Closed Loop, N\/O, A, Brown","description":"\u003cp\u003eThe GRI 20RS-12 is a short press-fit recessed surface mount switch set, used as a contact sensor to detect when a door or window opens. The 5\/8″ length and 3\/8″ body suit installers who need a compact, concealed sensor, and the brown finish helps it blend into many frames.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 20RS-12\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Recessed Surface Mount Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBody diameter:\u003c\/strong\u003e 3\/8″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 5\/8″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard gap:\u003c\/strong\u003e 1\/2″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower rating:\u003c\/strong\u003e 10W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 200VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent:\u003c\/strong\u003e 0.50A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCircuit:\u003c\/strong\u003e Closed loop, N\/O\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eDrill a hole sized for the press-fit body, push the switch in until seated, and keep the magnet within the rated gap when aligning it. Test the loop with the door or window open and closed before finishing the wiring.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356122329309,"sku":"KB-20RS-12","price":54.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/28.jpg?v=1787760188"},{"product_id":"gri-413pwg-g-industrial-surface-mount-switch-set-wide-gap-dpdt-gray","title":"GRI 413PWG-G Industrial Surface Mount Switch Set, Wide Gap, DPDT, Gray,","description":"\u003cp\u003eThe GRI 413PWG-G is a wired, surface mount magnetic contact switch set from George Risk Industries, built as a wide gap, DPDT (Form C) unit in gray. It suits commercial installations that need a steel-bodied contact for monitoring doors or other openings. Made in the US, it carries a U.L. 10C fire rating indication.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSurface mount magnetic contact designed for industrial use.\u003c\/li\u003e\n\u003cli\u003eCovers and mounting hardware are included.\u003c\/li\u003e\n\u003cli\u003eBuilt-in E.O.L. resistors and diodes can be added upon request.\u003c\/li\u003e\n\u003cli\u003ePrivate labeling is available upon request.\u003c\/li\u003e\n\u003cli\u003eThe series offers concealed terminals (400), side terminals (410) or a 36″ 2-conductor vinyl jacketed cable (410P).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e 413PWG-G\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVendor Name:\u003c\/strong\u003e George Risk Industries\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Magnetic Contact\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\/Usage:\u003c\/strong\u003e Commercial\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Gray\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity Technology:\u003c\/strong\u003e Wired\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Form:\u003c\/strong\u003e Form C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact Type:\u003c\/strong\u003e DPDT (Double Pole Double Throw)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Source:\u003c\/strong\u003e DC Power\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 175V DC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Current:\u003c\/strong\u003e 250mA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 5.0000W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003eMount the contact and magnet on a stable surface and keep them aligned within the wide gap range so the switch reliably changes state. After wiring, test the contact with the door or window open and closed before putting the zone into service.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356122755293,"sku":"KB-413PWG-G","price":74.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/27.jpg?v=1787760189"},{"product_id":"gri-ds-01-b-short-roller-ball-plunger-switch-12-wire-leads-22awg-closed-loop-with-360-of-ball-access-and-screw-down-flange-brown","title":"GRI DS-01-B Short Roller Ball Plunger Switch, 12\" Wire Leads 22AWG, Closed Loop, with 360° of Ball Access and Screw Down Flange, Brown","description":"\u003cp\u003eThe GRI DS-01-B is a short roller ball plunger switch with a closed loop contact and 12″ wire leads, finished in brown. It senses when a door or other moving part pushes the plunger, and it suits installers and homeowners who want a compact, hermetically sealed switch that fits without a deep mounting hole. The 360° of ball access gives smooth downward travel for longer life and better reliability, and the screw down flange makes mounting straightforward.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLonger leads, zip cord or jacketed cable can be requested.\u003c\/li\u003e\n\u003cli\u003eThe switch is offered in both closed loop and SPDT versions.\u003c\/li\u003e\n\u003cli\u003eA terminal block is available for this switch.\u003c\/li\u003e\n\u003cli\u003eThe hermetically sealed body is built for dependable operation.\u003c\/li\u003e\n\u003cli\u003ePlated contacts resist sticking and freezing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e DS-01-B\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e DS-01\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Plunger Switch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContact type:\u003c\/strong\u003e Closed Loop\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWire leads:\u003c\/strong\u003e 12″, 22AWG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBall access:\u003c\/strong\u003e 360°\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Screw down flange\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Brown\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation type:\u003c\/strong\u003e Hybrid (DIY + Professional)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountry of origin:\u003c\/strong\u003e US\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003ePosition the switch so the ball is pushed squarely by the door or moving part, and fasten the flange securely with screws. Run the leads away from sharp edges, and use a terminal block or splice connections properly if the 12″ leads need to be extended or joined to your panel wiring.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356122853597,"sku":"KB-DS-01-B","price":56.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/26.jpg?v=1787760190"},{"product_id":"gri-e-z-58-6-w-5-8-1-2-duct-raceway-6-length-6-pack-white","title":"GRI E-Z 58 6-W 5\/8\" 1\/2\" Duct Raceway, 6' Length, 6-Pack, White","description":"\u003cp\u003eThe GRI E-Z 58 6-W is a white duct raceway that comes as a 6-pack of 6' lengths, sized 5\/8″ by 1\/2″. It gives installers a tidy way to cover and route low-voltage cable along walls and ceilings. It suits jobs where exposed wiring needs a clean, finished look.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e GRI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e E-Z 58 6-W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e Duct Raceway\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 5\/8″ x 1\/2″\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 6'\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePack quantity:\u003c\/strong\u003e 6\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cp\u003ePlan the cable route and measure before cutting so the runs line up cleanly at corners and joints. Make sure the wall surface is clean and dry before mounting, and keep the cable count within what the raceway can hold without crowding.\u003c\/p\u003e","brand":"GRI","offers":[{"title":"Default Title","offer_id":48356122886365,"sku":"KB-E-Z-58","price":163.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/files\/25.jpg?v=1787760191"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0834\/9912\/2909\/collections\/hf_20261006_112951_5c4e195a-998a-42b3-85df-df90d0d21c3b.png?v=1791286627","url":"https:\/\/kaybeesecurity.com\/collections\/gri.oembed","provider":"Kaybee Security","version":"1.0","type":"link"}